Drum Roaster for beans.
Toasting is done after flaking, for larger productions the drum Roaster lends itself well to do the job. The temperature is controlled automatically, the thermal system runs on gas and heats the chamber in a homogeneous way to transmit the heat to the grains in the best way, has an internal mechanical stirrer to move the product in the best way; for the evacuation of moisture or excessive heat it has a separate extractor, thus ensuring better toasting with few variations in temperature.
- Automatic temperature control
- Sample extractor and process viewer
- Easy and fast cleaning and maintenance
Equipment designed for fast and efficient toasting of cocoa and coffee by batch in all varieties.
The capacity of the Drum Roaster is 100 kg/batch and the weight is approximately 270 kg.
The Drum Roaster has a thermal system of 3 gas-fired aerostatic burners with chispero ignition, a control unit with run-stop control, helical removal and steam extractor that indicates operation and process by means of light signaling. The control unit also controls the automatic fire ignition and allows the temperature to be displayed.
In terms of opening and closing the gas is automatic thanks to the solenoid electrovalve. It also features a steam extractor that sucks steam from the camera and a motor turning system.
It also features a steam extractor that sucks steam from the camera and a motor and pudcera-driven turning system.
On the other hand, the Drum Roaster is equipped with a pyramid-type feed hopper with sliding door and features a process chamber consisting of a central bar with rods and double twist-band with twist, process viewer and product sampling.
Approximate capacity
100 kg/batch
Refer. exterior dimensions
Width: 1015 mm – Length: 1930 mm – Height: 2690 mm
Weight approx.
270 kg
Gearbox for rotation Steam extractor motor
2.0 HP -1800 RPM 1.0 HP- 3600 RPM
1.5 kW 0.75 kW
Voltage / Hertz: 220-380-440v/ 50-60Hz
Control unit
Indicates the operation / process by light signaling
Run control - stop, removedor helicoidal, extractor de vapor Automatic fire ignition, temperature display.
Material
Stainless steel AISI 304 for contact with the product / Carbon steel in su structure
Thermal system
3 gas hot air burners, ignited by spark plug module
Gas supply
Automatic gas opening and closing by electro solenoid valve
Feed Hopper
Pyramid hopper type with gate for sliding the product
Process chamber
Formed by central shaft and double helical ribbon, process viewer and product sample taker.
Turning system
Powered by motor and bearing
Steam extractor
Consists of rotor and duct, sucks steam from the chamber
Chamber protector
Double layer with thermal insulation
Force Transmission
By front gate and with mechanical lever
Support structure
Mechanical movement transmission by gearmotor
Security guard
Consolidates machine, gearmotor and accessories of the combustion system
Cooler ECV-I. € 9500,-
Approximate capacity
100 kg/batch
Refer. exterior dimensions
Width: 1210 mm - Length: 1400 mm - Height: 970 mm
Weight approx.
140 kg
Three-phase gearmotor in agitator.
1.5 HP-1800 RPM
1.12 kW
Voltaje / Hertz: 220-380-440v/ 50-60Hz
Heat extraction motor
2.0HP 3600 RPM
1.5 kW
Control unit
Indicates the operation / process by light signaling Run control - stop
Material
Stainless steel AISI 304
Agitation system
Central bar with paddles, half-moon remover for move the product
Heat extractor
duct with coupling to the base of the chamber, extractor fan of the heat of the product
Chamber
Formed by agitation system with central schaft that connects adjustable blades with constant rotation and base with appropriate screen to allow the passage of cold air to the product.
Product dischage
By side hatch with safety handle
Motion transmission
Direct with gearmotor
Support structure
Consolidates machine in general, motor and accessories